ROLLER TYPE
Ceramic rubber coated roller is a kind of rubber coated roller, which is suitable for conveying wet sticky materials under severe conditions with large water content.
Ceramic coating is a way of coating the roller.
Performance introduction:
Its main features are as follows:
The surface of each ceramic rubber plate is cast into a durable rubber plate by casting hundreds of independent small ceramic pieces,
Each ceramic piece has the feature of bulge. Under the pressure of general conveyor belt, thousands of unique cast bulges
The utility model can generate positive traction, prevent skidding, and prolong the service life of the conveyor belt roller. At the same time, the bottom layer
The elasticity of rubber can play a good impact resistance role. Each ceramic rubber plate has a certain spacing
The separated groove can discharge the foreign matters (dust, soil) on the drum along the groove, making the drum unique
Its self-cleaning function is especially suitable for humid working environment.
Common specifications:
1. Rubber plate thickness 15mm, ceramic sheet 20 * 20 * 5, with red semi vulcanized layer
2. The width can be adjusted according to the actual size of the customer's roller, and the length is 500mm
Scope of application:
1. Belt speed is less than 4.5m/s;
2. The belt joint is not suitable for fixing with iron buckle;
3. The temperature of materials transported by belt shall be within 80 ℃;
4. It is suitable for conveying wet and sticky materials, and is suitable for driving drums or reversing drums where the belt conveyor often slips and the surface is coated with rubber and is not wear-resistant.
Advantages：
1. The high wear resistance of surface ceramics is used on the drive drum of the belt conveyor. The ceramics with special structure, special layout and special rubber structure increase the friction coefficient between them and the belt to prevent the belt from slipping.
2. Under the same load, the tension of the belt can be reduced and the service life of the belt can be extended.
3. The wear resistance of ceramics makes the service life of the driving drum more than ten times that of the original drum.
4. It is suitable for extremely harsh conditions such as high wear, easy slipping, materials or humid surroundings.